1. <s id="ssgb2"><object id="ssgb2"><blockquote id="ssgb2"></blockquote></object></s>
      2. <button id="ssgb2"></button><span id="ssgb2"></span>
      3. <s id="ssgb2"></s>

          <th id="ssgb2"></th>
          <em id="ssgb2"><acronym id="ssgb2"><u id="ssgb2"></u></acronym></em>
          <tbody id="ssgb2"></tbody>

          <legend id="ssgb2"><pre id="ssgb2"></pre></legend>

          1. 杭州順德鋸業有限公司是多片鋸生產廠家,主營:杭州多片鋸、多片鋸品牌、多片鋸鋸片、多片鋸銷售、多片鋸價格等!
            新聞 中心
            • 多片鋸廠家告訴你如何選擇鋸片的齒形
            • 本站編輯:杭州順德鋸業有限公司發布日期:2018-05-31 15:55 瀏覽次數:
            方木多片鋸比較常用的就是左右齒鋸片,它的鋸切速度快,并且修磨也較為方便。另外還有平齒、梯平齒、倒梯形齒等多種不同齒形的鋸片。
            1、左右齒鋸片使用比較廣泛,可以開料和橫鋸軟、硬實木和密度板、多層板、刨花板等。還有裝有防反彈力保護齒的左右齒鋸片,非常適合縱向切割帶有樹節的板材;如果鋸切質量要求非常好,可以選擇帶有負前角的左右齒鋸片。
            2、平齒形的鋸片鋸口比較粗糙,切削速度比較慢,但它修磨非常簡單,適合用于鋸切普通木材,或用于開槽。
            3、梯平齒鋸片修磨起來較為復雜,但它鋸切時可不容易產生崩裂,常用于鋸切人造板、防火板的鋸切。
            4、倒梯齒適用于裁板鋸底槽,比如鋸切雙貼面人造板時,可以先槽鋸調整厚度完成底面的開槽,再用主鋸完成鋸切,這樣就不會有崩邊。
            方木多片鋸的日常保養:
            1、墊套、鋸片、導航片要定期清洗,安裝時注意不要夾雜雜物。
            2、更換鋸片時將主軸芯用水對孔沖洗,也可以風槍對準里面的出水口吹風,將里面的雜物吹出來,保障出水孔的暢通。
            3、發現在連接螺絲松動應及時緊固,否則會影響使用。
            4、鋸片使用一定時間后會變鈍,應及時更換或修磨,保持鋸片鋒利,這樣才能提高鋸切的質量和效率。
            以上就是方木多片鋸需要保養的地方,定期保養檢查發現小故障應及時解決,使多片鋸保持高效率的鋸切。

            The most commonly used square saw is the left and right teeth saw blades. The sawing speed is fast and the grinding is more convenient. In addition, there are many kinds of saw blades, such as flat teeth, ladder teeth, inverted trapezoidal teeth and so on.
            1, the left and right teeth saw blades are the most widely used, which can be opened and cross saw soft, hard solid wood and density board, multi-storey board, particleboard and so on. There are also left and right toothed saw blades with anti elastic protection teeth, which are very suitable for longitudinal cutting with tree segments. If the sawing quality is very good, the left and right saw blades with the negative front angle can be selected.
            2. Flat saw saw blade is rough and cutting speed is slow, but its grinding is very simple. It is suitable for sawing ordinary wood or slotting.
            3, the ladder flat saw blade is more complex to grind, but it is not easy to crack when sawing. It is often used for sawing of wood-based panels and fireproof boards.
            4. The staircase teeth are suitable for the bottom slots of the cutting plate saw, for example, when cutting the double veneer board, the slotting can be adjusted to complete the slotting of the bottom surface, and then the sawing is finished with the main saw so that there will be no edge.
            Daily maintenance of multiple square saws:
            1, cushion covers, saw blades and navigation films should be cleaned regularly.
            2, when replacing the saw blade, the water of the main shaft will be used for Kong Chongxi, and the wind gun can be blown at the outlet of the inside, and the sundries inside are blown out to ensure the smooth flow of the hole.
            3, found that the loosening of the connecting screws should be fastened in time, otherwise it will affect the use.
            4, the blade will blunt after a certain period of time. It should be replaced or repaired in time to keep the saw blade sharp, so as to improve the quality and efficiency of sawing.
            The above is the need for maintenance of square wood multi sawing saws. Regular maintenance checks found that minor faults should be resolved in time, so that multi saws should be sawed at high efficiency.

                1. <s id="ssgb2"><object id="ssgb2"><blockquote id="ssgb2"></blockquote></object></s>
                2. <button id="ssgb2"></button><span id="ssgb2"></span>
                3. <s id="ssgb2"></s>

                    <th id="ssgb2"></th>
                    <em id="ssgb2"><acronym id="ssgb2"><u id="ssgb2"></u></acronym></em>
                    <tbody id="ssgb2"></tbody>

                    <legend id="ssgb2"><pre id="ssgb2"></pre></legend>

                    1. 韩国V欧美V亚洲V日本V_韩国A片大全免费看片_亚洲妇女自偷自偷图片_久久精品国产久精国产